Supermicro SuperServer SYS-220ME-FN6R - Component Descriptions

11
Chapter 1: Introduction
Control Panel
Figure 1-2. Control Panel
UID
UID Button
Power Button
Information LED
Power LED
Power Fail LED
HDD LED
NIC1 LEDNIC2 LED
Drive Carrier Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID


VROC section in this manual.
Drive Carrier LED Indicators
Color Blinking Pattern Behavior for Device
Activity
LED
Blue Solid On Idle SAS drive installed
Blue Blinking I/O activity
󰀨 Idle SATA or no drive
Status
LED
Red Solid On Failure of drive with RSTe support
Red Blinking at 1 Hz Rebuild drive with RSTe support
Red Blinking at 4 Hz Identify drive with RSTe support
Red Blinking with two blinks
and one stop at 1 Hz
Hot spare for drive with RSTe support
Red 
󰀨
Power on for drive with RSTe support
LAN Speed Indicator
One LED indicates the network speed.
LAN LED (Speed Indicator)
Color Speed
Green 10Gbps
Amber 1Gbps
󰀨 100Mbps or less