Supermicro SuperServer SYS-220ME-FN6R - Expansion Cards and Cooling

51
Chapter 3: Maintenance and Component Installation
3.7 Expansion Cards

Installing a low-prole expansion card
1. Power down the system and remove the cover.
2. In the rear of the chassis, remove the blank PCIe slot assembly as shown.
3. Slide the PCIe expansion card into the PCIe slot assembly, while aligning it with the
PCIe slot.
4. Replace the PCIe slot assembly with the installed expansion card onto the rear of the
chassis and secure with a screw.
Figure 3-6. PCI Slot Assembly with PCIe Expansion Card
PCIe Expansion
Card
PCIe Slot
Assembly