16
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open: Normal
JP2 Front panel Pin 3 Function Option Pins 2-3: Front Panel UID Enable
JP5
BMC Power Button Ready Test
Header
Pins 1-2: Normal
JPL1 25G LAN Enable/Disable Pins 1-2: Enabled
JPNCSI1 AIOM NC-SI Enable/Disable Pins 2-3: Disabled
JPNCSI2 AIOM NC-SI Enable/Disable Short: Disabled
JWD1 Watchdog Timer Pins 1-2: Reset
LED Description Status
LE1
LED_L0, LED_L1 25G LAN Link and Activity LED
Link LED (Top)
Steady Green: 25G
Steady Yellow: 10G/1G
No Color: No Connection
ACT LED (Bottom)
LE6 PCH system power indicator
Green: Power On
Amber: Standby
Red: Platform Power Error
LEDM1 BMC Heartbeat LED
Blinking Green: BMC Normal
Solid Green: During BMC Reset or a Cold Reboot
LEDPWR (LE2) Power LED Green: Power on
Connector Description
BT1 Onboard battery
COM1(JUSB2) Rear IO mini-USB serial COM port
FAN1 ~ FAN6 CPU/System fan headers
FP1, FP2 Front panel connectors to provide connection for USB, VGA, and power LEDs.
JAIOM1 AIOM networking slot (CPU1 PCIe 4.0x16)
J24 Front Panel USB 2/3 Header
JCPLD1 Complex-Programmable Logical Device (CPLD) JTAG header
JF1 Front Panel Control header
JSFP0, JSFP1 Onboard 25G LAN SFP+
JLAN2 Dedicated BMC LAN port
JL1 Chassis Intrusion header
To Next Page
Loading...
