Supermicro SuperServer SYS-220ME-FN6R - Front Panel Controls and Indicators

61
Chapter 4: Motherboard Connections
Control Panel LEDs
Power Button
(Blue LED_Cathode_UID)
NIC1 (Activity) LED
Reset Button
HDD LED
FP PWR LED
ID_UID/3.3V Stby
Ground
19
Ground
20
1 2
Ground
Power Fail (for LED6)
NIC2 (Link) LED
NMI
3.3V
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
3.3V
JF1
Red+ Blue+
NIC2 (Activity) LED
NIC1 (Link) LED
Key
Key
Control Panel
The front control panel header (JF1) contains header pins for various buttons and indicators
that are normally located on a control panel at the front of the chassis. The reset button can
 

panel buttons and LED indicators.
Front Control Panel (JF1)
LED Indicators
Event Power (LED1) HDD (LED2) LAN (LED3/4) UID (LED5) Information (LED5) Power Fail (LED6)
Power On Solid On
HDD Activity Blinking
NIC Activity Blinking
Overheat Solid On
Fan Fail Blinking @1Hz
Power Fail Blinking @1/4Hz Solid On
Local UID On Solid On
Remote UID On Blinking 1Hz
Checking BMC/BIOS
Blinking @4HZ
Recovering/Updating BMC Blinking
@4HZ
BMC 2 Blinks
@4Hz,
1 Pause @2Hz
󰀨󰀨
BIOS/BMC
Blinking
@10Hz
Flash Not Detected or Golden
Image Check Failed
BMC/BIOS
Blinking @1HZ
CPLD Recovery Mode Blinking
@10Hz
(MB UID
LED)
Blinking @10Hz
(FP Red LED)