Supermicro SuperServer SYS-220ME-FN6R - Appendix B System Specifications; System Components Overview

120
Appendix B: System Specications
Appendix B
System Specications
Processors
Dual 3rd Gen Intel Xeon Scalable processors, P+ (LGA4189) sockets
Chipset
Intel PCH C621A
BIOS

auto detection support, RTC (Real Time Clock) wakeup, and SMBIOS 3.0 or later
Memory
Up to 4TB of 3DS LRDIMM/LRDIMM/3DS RDIMM/RDIMM DDR4 (288-pin) ECC memory with speeds of 3200/2933/2666
Storage Drives
Six 2.5" hot-swap drive bays
Two M.2 PCIe 4.0 x2 M-Key NVMe
PCI Expansion Slots
Two PCIe 4.0 x16 slots (for GPUs)
One PCIe 4.0 x8 slot
One PCIe 4.0 x16 slot
One PCIe 4.0 x16 AIOM slot
Input/Output
One rear serial (COM) port
Eight I-SATA 3.0 ports at 6 Gb/s
Four S-SATA 3.0 ports at 6 Gb/s
One rear VGA port
Two rear USB 3.0 ports
Motherboard
X12DPD-A6M25; proprietary 12" x 13" (305 mm x 330 mm)
Chassis
CSE-LB23MTS-R0AMBNDP; 2U Rackmount, (WxHxD) 17.2” x 3.5” x 17” (437 x 89 x 432mm)
System Cooling
Four 8-cm heavy-duty PWM fans
Power Supply
Model: PWS-1K62A-1R, 1600W dual redundant modules, 80Plus Titanium level
AC Input Voltages: 90-127/200-264 VAC
Rated Input Current: 13-9A (100-127V)/10-8A (200-240V)
Rated Input Frequency: 47-63 Hz
Rated Output Power: 1600 Watt
Rated Output Voltages: 100-127V: +12V (83.3A), +12Vsb (2.1A); 200-240V: +12V (133A), +12Vsb (2.1A)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)