Supermicro SuperServer SYS-220ME-FN6R - Page 62

62
Chapter 4: Motherboard Connections
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
Power Button and BIOS/BMC Status LED Indicator
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Power On and BMC/BIOS Status LED Button
The Power On and BMC/BIOS Status LED button is located on pins 1 and 2 of JF1.
󰀨
Refer to the tables below for more information.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Momentarily contacting both

Power Button
Pin Denitions (Pin 1 & Pin 2 of JF1)
Status Event
Green: solid on System power on
BMC/BIOS blinking green at 4Hz BMC/BIOS checking
BIOS blinking green at 4Hz BIOS recovery/update in progress
󰀨󰀨 BMC recovery/update in progress
BMC/BIOS blinking green at 1Hz Flash not detected or golden image checking
failure
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. When this LED turns solid

Power Fail LED
Pin Denitions (JF1)
Pin# Denition
5 3.3V
6 PWR Fail for LED6 (Solid red on: PWR failure)