53
Chapter 3: Maintenance and Component Installation
Loosen Screw
GPU Brace
GPU Bracket Assembly
GPU and
GPU Bracket Assembly
Tighten Screw
GPU Brace
GPU
GPU and
GPU Bracket Assembly
Tighten Screw
3. Remove the GPU brace from the GPU bracket assembly by loosening the screw that is
holding down the GPU brace.
4. Slide a PCIe (GPU) expansion card into the slot in the GPU bracket assembly while
aligning it with the PCIe slot. Install the GPU brace and tighten the screw to secure it.
5. Replace the GPU bracket assembly with the installed expansion card into the rear of the
chassis and secure with a screw.
To Next Page
Loading...
