Supermicro Superserver - Page 84

84
SuperServer 1029P-WTRT User's Manual
Onboard LAN Device
Select Enabled to enable the Onboard LAN device. The options are Enabled and Disabled.
Onboard LAN1 Option ROM

boot. The options are Disabled, Legacy, and EFI.
Onboard LAN2 Option ROM

boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Conguration
Network Stack

Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Use this feature to enable Ipv4 PXE Boot Support. If this feature is disabled, it will not create
the Ipv4 PXE Boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Use this feature to enable Ipv4 HTTP Boot Support. If this feature is disabled, it will not create
the Ipv4 HTTP Boot option. The options are Disabled and Enabled.
Ipv6 PXE Support
Use this feature to enable Ipv6 PXE Boot Support. If this feature is disabled, it will not create
the Ipv6 PXE Boot option. The options are Disabled and Enabled.
Ipv6 HTTP Support
Use this feature to enable Ipv6 HTTP Boot Support. If this feature is disabled, it will not create
the Ipv6 HTTP Boot option. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the ESC key to abort the PXE boot. The
default is 0.