EasyManua.ls Logo

Supermicro X7SLM+ - Default Chapter; About this Motherboard; Conventions Used in the Manual; Manual Organization

Supermicro X7SLM+
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preface
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X7SLM/X7SLM+ motherboard.
About This Motherboard
The X7SLM/X7SLM+ supports a single Intel® Core™ 2 Duo/Pentium dual-core/
Pentium D/Pentium 4/Celeron dual-core/Celeron/Celeron D Processor with a system
bus speed of up to 800 MHz. The Intel® Core™ 2 Duo/Pentium/Celeron Processor
supports the 775-Land Grid Array Package that interfaces with the motherboard via
an LGA775 socket. With support of the Intel® Core Microarchitecture Technology,
Graphics Media Accelerator 950, Advanced Digital Media Boost, and Smart Memory
Access, the X7SLM/X7SLM+ delivers unparalleled system performance and great
energy efciency in a slim package. Please refer to the motherboard specica-
tions pages on our web site (http://www.supermicro.com/Products/) for updates on
supported processors. This product is intended to be installed and serviced by a
professional.
Manual Organization
Chapter 1 describes the features, specications and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists the Windows OS Installation Instructions.
Appendix C lists Other Software Program Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury
Preface
iii

Table of Contents

Other manuals for Supermicro X7SLM+

Related product manuals