Supermicro X9SRW-F - Load Onboard LAN1 Option ROM; Load Onboard LAN2 Option ROM; VGA Priority; Super IO Device Configuration

4-14
X9SRW Motherboard Series User’s Manual
Load Onboard LAN1 Option ROM / Load Onboard LAN2 Option ROM
This feature is to enable or disable the onboard option ROMs. The options are Dis-
abled and Enabled. The default for LAN 1 is Enabled. Default for LAN 2 is Disabled.
VGA Priority
This option allows the user to specify which graphics controller to be used as the
primary boot device. The options are Onboard and Offboard.

Super IO Device Conguration

Serial Port 1 Conguration
Serial Port
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.
Change Settings
This option species the base I/O port address and the Interrupt Request address
of the serial port. The options for Serial Port 1 are listed below.
Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=5;
IO=2E8h; IRQ=7;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are Normal and High Speed.

Serial Port 2 Conguration
Serial Port
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.