Supermicro X9SRW-F - Com 1;Sol; Serial Port Console Redirection; Console Redirection

Chapter 4: AMI BIOS
4-15
Change Settings
This option species the base I/O port address and the Interrupt Request address
of the serial port. The options for Serial Port 2 are listed below.
Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=5;
IO=2E8h; IRQ=7;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are Normal and High Speed.
Serial Port 2 Attribute
This feature allows the user to set the serial port mode for Console Redirection.
The options are SOL and COM.

Serial Port Console Redirection
These submenus allow the user to congure the following Console Redirection
settings for a COM Port 0 or COM Port 1 as specied by the user.
COM 1/SOL
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. (The default setting for COM1 is Disabled,
and for SOL is Enabled.)