4-30
Supermicro C7Z270-CG-L Motherboard User’s Manual
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or gen-
erate NMI based on jumper settings when it is expired for more than
5 minutes. The options are Disabled and Enabled.
Power Button Function
This feature controls how the system shuts down when the power but-
ton is pressed. Select 4 Seconds Override for the user to power off the
system after pressing and holding the power button for 4 seconds or
longer. Select Instant Off to instantly power off the system as soon as
the user presses the power button. The options are Instant Off and 4
Seconds Override.
AC Loss Policy Depend On
Use this feature to set the power state after a power outage. Select
Stay Off for the system power to remain off after a power loss. Se-
lect Power On for the system power to be turned on after a power
loss. Select Last State to allow the system to resume its last power
state before a power loss. The options are Stay Off, Power On,
and Last State.
EuP Support
EuP, or Energy Using Product, is a European energy-saving specica-
tion that sets a standard on the maximum total power consumption on
electrical products. Check the box to activate EUP support. The default
is Unchecked (Disabled).