Supero C7Z270-CG-L User Manual

Chapter 4: AMI BIOS
4-15
Core Voltage Offset
Use this feature to set the CPU Voltage Offset value from -500mV to
+500mV. Enter 0 to use the manufacturer default value.
Offset Prex
Use this feature to set the Core Voltage Offset value as a positive (+)
number or a negative (-) number. The default setting is "+".
Core PLL Voltage Offset
Use this feature to set the CPU PLL Voltage Offset value from 0-63
with each unit at 15mV. This is used to increase the range of the core
frequency in extreme overclocking conditions. Enter 0 to use the manu-
facturer default value.
Ring Max OC Ratio
Use this feature to set the maximum overclocking ratio for the RING
Domain. Select a value.
Ring Min OC Ratio
Use this feature to set the minimum overclocking ratio for the RING
Domain. Select a value.
Uncore Voltage Offset
Use this feature to specify the Offset Voltage applied to the Uncore do-
main. Select a value.
Offset Prex
Use this feature to set the offset value as positive or negative. The op-
tions are + or -.
PCH Voltage
Use this feature to trim the PCH Voltage. Select from these values:
1.00V, 1.05V, 1.10V, 1.15V, 1.20V, 1.25V, and 1.30V.
CPU_IO Voltage
Use this feature to calibrate the CPU I/O Voltage. Select from these
values: 0.975V, 1.15V, 1.30V, and 1.50V.
PSYS Slope
PSYS Slope is dened in 1/100 increments and uses the BIOS VR mail-
box command 0x9. Range is 0-200. For example, enter 125 for a 1.25
slope. Enter 0 for AUTO.

Supero C7Z270-CG-L Specifications

General

Brand	Supero
Model	C7Z270-CG-L
Category	Motherboard
Language	English