4-14
Supermicro C9X299-PG/-PGF/-RPGF Motherboard User’s Manual
Debug Interface Lock
Select Enable to activate Debug Interface lock. The options are Enabled
and Disabled.
Processor trace memory allocation
This feature allows the user to select the memory amount for processor
tracing to utilize. The settings are Disabled, 4KB, 8KB, 16KB, 32KB,
64KB, 128KB, 256KB, 512KB, 1MB.
FCLK Frequency for Early Power On
Select the FCLK frequency for early power on. The options are Normal
(800MHz), 1GHz and 400MHz.
Voltage Optimization
Select Voltage Optimization settings. The options are Disabled, Enabled,
or Auto.
Power & Performance
CPU - Power Management Control
CPU - Power Management Control
Boot performance mode
Select the performance state that the BIOS will set on start-up. The
options are Max Battery, Max Non-Turbo Performance, and or Turbo
Performance.
Intel® SpeedStep™
Intel SpeedStep Technology allows the system to automatically adjust
processor voltage and core frequency in an effort to reduce power
consumption and heat dissipation. Please refer to Intel’s website
for detailed information. The options are Disabled and Enabled.
Race To Halt(RTH)
This feature dynamically increases CPU frequency in order to enter
Package C-State faster to reduce overall power consumption. Pack-
age C-States are lower C-States than C6. The options are Enabled
or Disabled.
To Next Page
