Supero X10SL7-F User Manual

4-10
X10SL7-F User’s Manual
Performance Tuning Mode (Available when both XMP memory and an Extreme Edition
CPU are installed.)
This item allows the user to choose the Intel Extreme Memory Prole (XMP) Specication which
enables DDR3 memory to operate beyond the standard JEDEC SPD specication. Select XMP
for 1600 MHz XMP memory operation and better system performance. Otherwise, leave this
setting at Auto.
CPU C3 Report (Available when "CPU C-States" is set to Enabled)
Select Enabled to allow the BIOS to report the CPU C3 State (ACPI C2) to the
operating system. During the CPU C3 State, the CPU clock generator is turned
off. The options are Enabled and Disabled.
CPU C6 Report (Available when "CPU C-States" is set to Enabled)
Select Enabled to allow the BIOS to report the CPU C6 State (ACPI C3) to the
operating system. During the CPU C6 State, the power to all caches is turned
off. The options are Enabled and Disabled.
C6 Latency (Available when "CPU C-States" is set to Enabled)
Select Short to set a short delay time(period) during which the BIOS reports
CPU C6 State (ACPI C3) to the operating system. Select Long to set a long
delay time(period) during which the BIOS reports CPU C6 State (ACPI C3)
to the operating system. The options are Short and Long.
CPU C7 Report (Available when "CPU C-States" is set to Enabled
Select Enabled to allow the BIOS to report the CPU C7 State (ACPI C3) to the
operating system. CPU C7 State is a processor-specic low C-State. The options
are Disabled, CPU C7, and CPU C7s
C7 Latency (Available when "CPU C-States" is set to Enabled)
Select Short to set a short delay time(period) during which the BIOS reports
CPU C7 State (ACPI C3) to the operating system. Select Long to set a long
delay time(period) during which the BIOS reports CPU C7 State (ACPI C3)
to the operating system. The options are Short and Long.
C1 State Auto Demotion
When this item is enabled, the CPU will conditionally demote C3, C6 or C7
requests to C1 State based on un-cored auto-demote information. The options
are Disabled and Enabled.
C3 State Auto Demotion
When this item is enabled, the CPU will conditionally demote C6 or C7 requests
to C3 State based on un-cored auto-demote information. The options are Dis-
abled and Enabled.
C-State Pre-Wake
Select Enabled to support C State Pre-Wake State features. The options are
Enabled and Disabled

Supero X10SL7-F Specifications

General

Brand	Supero
Model	X10SL7-F
Category	Motherboard
Language	English