To Next Page

To Previous Page

4-18

X10SL7-F User’s Manual

Onboard LAN1/LAN2 Option ROM

Select iSCSI to use the iSCSI Option ROM to boot the computer using an iSCSI

device installed in a LAN port specied. Select PXE (Preboot Execution Environ-

ment) to boot the computer using a PXE device installed in a LAN port specied.

Select Disabled to prevent system boot using a device installed in a LAN port to

boot the system. The options for Onboard LAN1 Option ROM are Disabled, PXE

and iSCSI. The options Onboard for LAN2 Option ROM are PXE and Disabled.

Onboard SAS Option ROM

Select Enabled to boot the computer using a SAS device installed in the system.

The options for SAS Onboard Option ROM are Disabled and Enabled.

Network Stack

Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unied

Extensible Firmware Interface) for network stack support. The options are Enabled

and Disabled.



ACPI Settings

High Precision Event Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces

periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in

synchronizing multimedia streams, providing smooth playback and reducing the de-

pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

ACPI Sleep State

This feature selects the ACPI Sleep State that the system will enter into when

the suspend button is activated. The options are Suspend Disabled, and S3 only

(suspend to RAM).

WHEA Support

This feature Enables the Windows Hardware Error Architecture (WHEA) support for

the Windows 2008 (or a later vision) operating system. The options are Enabled

and Disabled.

Supero X10SL7-F User Manual

Other manuals for Supero X10SL7-F