To Next Page

To Previous Page

4-24

X10SL7-F User’s Manual



H/W (Hardware) Monitor

PC Health Status

Fan Speed Control Mode

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When the

CPU on-die temperature increases, the fan speed will also increase for effective

system cooling. Select "Full Speed" to allow the onboard fans to run at full speed

(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting

is recommended for special system conguration or debugging. Select "Standard"

for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the

needs between system cooling and power saving. This setting is recommended for

regular systems with normal hardware congurations. The options are Full Speed

(@100% of PWM Cycle) and Standard (@50% of PWM Cycle).

The following items will be displayed:

•CPU Temperature (PECI)

•Front Side Sys. (System) Temperature

•Rear Side Sys. (System) Temperature

•PCH Temperature

•Fan1 Speed/Fan2 Speed/Fan3 Speed/Fan4 Speed/Fan5 Speed

•VCORE

•12V

•VDIMM

•5Vcc

•PCH 1.05V

•AVCC

• 3.3Vcc

•VSB

•VBAT

Supero X10SL7-F User Manual

Other manuals for Supero X10SL7-F