Supero X9SAE - Azalia HD Audio; Frontside Audio Mode; IDE;SATA Configuration; SATA Mode

Chapter 4: AMI BIOS
4-11
Azalia HD Audio (available if JPAC1 jumper is enabled)
This feature enables or disables the motherboard's built-in High Deni-
tion (HD) audio. The options are Enabled and Disabled.
Frontside Audio Mode (available if Azalia HD Audio is enabled)
This feature selects between AC'97 legacy audio and HD audio. The
options are HD Audio a n d AC ' 97.

IDE/SATA Conguration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE Devices and displays the following items:
SATA Mode
This item selects the mode for the installed drives. The options are Disabled, IDE
Mode, AHCI Mode and RAID Mode.
AHCI Mode
The following items are displayed when AHCI Mode is selected:
Aggressive LPM Support
This feature Enables or Disables Agressive Link Power Management sup-
port for Cougar Point B0 stepping and later. The options are Enabled and
Disabled.
SATA Port0~Port5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
Hot Plug
Set this item to Enabled to enable hot-plugging. The options are En-
abled and Disabled.
Staggered Spin Up
Set this item to Enabled to enable Staggered Spin-up support. The
options are Enabled and Disabled.
IDE Mode
The following items are displayed when IDE Mode is selected:
IDE Legacy / Native Mode Selection
This feature enables support for either legacy or native mode. The options
are Native and Legacy.