Supero X9SAE User Manual

Chapter 4: AMI BIOS
4-21
4-5 Boot Settings
Setup Prompt Timeout
Number of seconds to wait for setup activation key. Enter 65535 (0xFFFF) to
wait indenitely.
Retry Boot Devices
This item will force the BIOS to continuously retry to boot from legacy devices.
The options are Disabled and Enabled.
Boot Option Filter
This item selects which set of devices the BIOS boots from. The options are UEFI
and Legacy, Legacy Only and UEFI Only.
Boot Option #1, #2, #3, ...
This item determines from the installed boot devices, the order where the BIOS
boots from. The options are UEFI: Built-n EFI Shell, [other detected devices],
and Disabled.
Network Device BBS Priorities,
CD/DVD ROM Drive BBS Priorities,
Hard Drive BBS Priorities,
These options appear only if any of the devices are installed and detected by the
BIOS. This feature sets the order of legacy devices in their particular groups. The
boot options are dependent on what devices are installed in the system.
 : Select Screen
 : Select Item
Enter: Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
Version x.xx.xxxx. Copyright (C) 2011 American Megatrends, Inc.
Sets the system boot order
Setup Prompt Timeout 1
Retry Boot Devices [Disabled]
Boot Option Filter [UEFI and Legacy]
Boot Option Priorities
Boot Option #1 [P5: XXX XXXXXXX ...]
Boot Option #2 [IBA GE Slot 00C8 v.. ]
Boot Option #3 [UEFI: Built-in EFI .....]
Network Device BBS Priorities
CD/DVD ROM Drive BBS Priorities
Hard Drive BBS Priorities
Main Advanced Boot Save & ExitEvent Logs
Security

Supero X9SAE Specifications

General

Brand	Supero
Model	X9SAE
Category	Motherboard
Language	English