To Next Page

To Previous Page

4-16

X9SAE Motherboard Series User’s Manual

Fan 1 ~ Fan 4, Fan A Reading

This feature displays the fan speed readings from fan interfaces Fan1 through

Fan4 and Fan A.

VCORE, 12V, VDIMM, 5VCC, VTT, AVCC, 3.3VCC, VSB, VBAT

This feature displays the current voltages of the above voltage monitors.



ACPI Settings

Use this feature to congure Advanced Conguration and Power Interface (ACPI)

power management settings for your system.

High Precision Event Timers

Select Enabled to activate the High Performance Event Timer (HPET) that produces

periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in

synchronizing multimedia streams, providing smooth playback and reducing the de-

pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

Suspend Mode

This setting allows you to congure the ACPI (Advanced Conguration and Power

Interface) sleep state for your system when it is in the Suspend mode. The op-

tions are Suspend Disabled, and S3 (STR). S3 (STR) is the deepest sleep state

in these options.

WHEA Support

This feature Enables the Windows Hardware Error Architecture (WHEA) support

for the Windows 2008 operating system (and later versions). The options are

Enabled and Disabled.



Trusted Computing Conguration

TPM Support

This feature enables or disables the BIOS TPM support. The options are Disable

and Enable. Note that the OS will not reveal the security device.



Intel TXT(LT) Conguration

Secure Mode Extensions (SMX)

This feature can be congured if it is supported by the processor. Enable this feature

to activate Intel TXT, below. The options are Enabled and Disabled.

Supero X9SAE User Manual

Questions and Answers: