4-12
X9SAE Motherboard Series User’s Manual
SATA Port0~Port5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA Port0~Port5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
Hot Plug
Set this item to Enabled to enable hot-plugging. The options are En-
abled and Disabled.
PCIe/PCI/PnP Conguration
This feature allows the user to set the PCI/PnP congurations for the following items:
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI bus clock cycles. The options are 32 PCI Bus
Clocks, 64 PCI Bus Clocks, 96 PCI Bus Clocks, 128 PCI Bus Clocks, 160 PCI
Bus Clocks, 192 PCI Bus Clocks, 224 PCI Bus Clocks and 248 PCI Bus Clocks.
Above 4G Decoding
Select Enabled to activate 64-bit capable devices to be decoded above the 4G
address space (only if the system supports 64-bit PCI decoding. The options are
Disabled and Enabled.
PERR# Generation
PERR (Parity Error) is for reporting address parity errors. It is shared among all
PCI devices. The options are Disabled and Enabled.
SERR# Generation
SERR (System Error) is for reporting system errors, or any other fatal system er-
rors. It is shared among all PCI devices. The options are Disabled and Enabled.
PCI-E Slot 5 OPROM
Use this feature to enable or disable PCI-E Slot 5 slot Option ROM. The options
are Disabled and Enabled.
To Next Page
Loading...
