Chapter 4: AMI BIOS
4-17
H/W (Hardware) Monitor
PC Health Status
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase for effective
system cooling. Select "Full Speed" to allow the onboard fans to run at full speed
(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting
is recommended for special system conguration or debugging. Select "Standard"
for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the
needs between system cooling and power saving. This setting is recommended for
regular systems with normal hardware congurations. The options are Full Speed
(@100% of PWM Cycle), and Standard (@50% of PWM Cycle).
The following items will be displayed:
•Peripheral Temperature
•System Temperature
•CPU Temperature
•PCH Temperature
•DIMM1~DIMM4 Temperature
•Fan 1 Speed ~ Fan 6 Speed
•12VCC
•5VCC
•3VCC
•PCH Voltage
•Memory VCC
•CPU Vcore
•VBAT
To Next Page
Loading...
Need help?
General
