Supero X9SKV-1125 User Manual

Chapter 4: AMI BIOS
4-25
Restore Optimized Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>.
These are factory settings designed for maximum system performance but not for
maximum stability.
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <En-
ter>. This enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <En-
ter>. Use this feature to retrieve user-dened settings that were saved previously.
Boot Override
Listed on this section are other boot options for the system (i.e., Built-in EFI shell).
Select an option and press <Enter>. Your system will boot to the selected boot
option. This is a one-time override.
Set ME to Disable Mode
Enable this option to initiate ME recovery mode. The options are Enabled
and Disabled.

Supero X9SKV-1125 Specifications

General

Brand	Supero
Model	X9SKV-1125
Category	Motherboard
Language	English