4-30
X9SPV-F/LN4F Motherboard User Manual
Restore Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for
maximum performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press
<Enter>. This enables the user to save any changes to the BIOS setup for future use
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <En-
ter>. Use this feature to retrieve user-dened settings that were saved previously.
Boot Override
Listed on this section are other boot options for the system (i.e., Built-in EFI shell).
Select an option and press <Enter>. Your system will boot to the selected boot
option. This is a one-time override.
IBA IGE Slot 0100 v1381
This item will attempt to boot from the Network Boot Device.
UEFI: Built-in EFI Shell
This item at temps to launch EFI shell application (Shellx64.e) from one of the
available lesystem devices.
Me FW Image Re-Flash
Use this item to enable the ME image re-ash function. The options are Dis-
abled and Enabled.
To Next Page
Loading...
Need help?
General
