- 38 -
4.1.5 SETTING MENU
>Press icon enter machine setting menu。
>> Clamp pressure correction；
>> Grinding wheel position correction；
>> Scanning probe correction；
>> Processing size setting；
>> Processing winding number setting；
>> Base axis setting。
>> Grooving setting（only apply to edger with grooving and safe chamfering function）；
>>Safe chamfering setting（only apply to edger with grooving and safe chamfering function）.
Note:
The parameter setting needs to be completed under the guidance of the professional
after-sales service staff. Users should not enter the parameter setting menu by themselves.
To Next Page
Loading...
