- 45 -
6. TECHNICAL SPECIFICATIONS
6.1 FEATURES
> Automatic initialization
> Three - dimensional probe front & rear surface camber
> wheel configuration：
>> Glass grinding wheel
>> Resin rough wheel
>> Bevel/flat edge grinding wheel
>> Bevel/flat edge polishing wheel
> Automatic clip, three selections of clip pressure, adapt to different material lens processing
> Connect with water pump using circulating water and connect with solenoid valve when
running water
> Grinding diameter
>> <=80 mm
>> Flat（No secured bevel）﹥=19.00mm
>> Bevel（No secured bevel）﹥=19.00mm
> Automatic cleaning of lens fixing system and grinding room
> Lens processing statistics
To Next Page
Loading...
