- 7 -
1.2 REMOVE THE FIXED TRANSPORTATION RAILS
1.2.1 CONDITION
> Put thee machine on the working table,
> Around the machine, we need enough space.
1.2.2 PROCEDURE
Remove the rails in following procedures:
As shown in below figure:
#1 Under the help of another person,turn over the machine, so you can
find the 4 screws that used to fix the rails
#2 Use 13mm inner hexagon spanner to take off the screws, remove the
rails
#3 Keep the rails together with the other packing materials
To Next Page
Loading...
