SUTO S430 - 5 Features

5 Features
5 Features
• Flow and consumption measurement in wet or high mass flow or
velocity applications.
• Measurement at the compressor outlet.
• Bi-directional measurement available based on the advanced auto-
direction-detection technology.
• Insertion-type flow sensor, facilitating installation under pressure
through a ball valve.
• High-temperature applications up to 230°C.
• Tubes with diameters from 1.25” up to 10” through center
installation. Bigger diameters through non-center installation.
• No mechanical wear parts.
• All parts in contact with the medium are made of stainless steel.
• Various options for the signal output, such as analog and pulse,
Modbus RTU, Modbus TCP, or M-Bus.
• Optional Power over Ethernet (PoE) for the Modbus TCP output.
• Mobile service App S4C-FS for monitoring and configuring flow
sensors on mobile devices.
• Optional display for monitoring and configuring values directly on
the sensor.
10 S430