11 Calibration
11 Calibration
The sensor is calibrated before delivery. The calibration date is printed
on the certificate which is shipped with the sensor. The accuracy of the
sensor is regulated by the on-site conditions. Parameters such as oil,
high humidity, or other impurities can affect the calibration and
furthermore the accuracy.
We recommend the sensor be calibrate at least once a year. The
calibration is excluded from the product warranty. For more information,
please contact the manufacturer.
12 Maintenance
To clean the sensor it is recommended to use distilled water or isopropyl
alcohol only. If the contamination can not be removed, you must send
the sensor to the manufacturer for inspection and manufacturer.
13 Disposal or waste
Electronic devices are recyclable material and do not
belong in the household waste.
The device, the accessories and its packings must be
disposed according to your local statutory requirements.
The dispose can also be carried by the manufacturer of the
product. Please contact the manufacturer for details.
44 S430
To Next Page
Loading...
