SUTO S430 - 4 Application

4 Application
4 Application
The S430 flow sensor is designed to measure the consumption of
compressed air and a variety of industrial gases in wet or high mass
flow/velocity applications. The sensor can even work in wet and dirty
gases such as the outlet of a compressor.
The S430 can measure the following parameters for compressed air or
gases:
Parameter Default unit
Velocity m/s
Volumetric flow m
3
/h
Pressure bar
Total consumption m
3
Temperature °C
Remark: You can change units using the service App
S4C-FS or the optional sensor display.
The S430 flow sensor is mainly used in compressed air systems in the
industrial environment. The S430 is not designed for explosive areas.
For the use in explosive areas, please consult the manufacturer.
S430 9