DIFFERENTIAL (REAR) 7F-21
10) Upon completion of gear tooth contact check in Step 9),
caulk flange nut (2) with caulking tool (1) and hammer.
Tightening Torque Specification
Required Service Material
Fastening part
Tightening torque
N•m kg-m lb-ft
Differential oil level/filler plug 50 5.0 36.5
Differential oil drain plug 28 2.8 20.5
Propeller shaft flange nuts 60 6.0 43.5
Differential carrier bolts 55 5.5 40.0
Bevel gear bolts 105 10.5 76.0
Bearing cap bolts 85 8.5 61.5
Lock plate bolts 12 1.2 9.0
Differential case screws 9 0.9 6.5
Material
Recommended SUZUKI product
(Part Number)
Use
Thread lock cement THREAD LOCK CEMENT
SUPER 1322
(99000-32110)
• Bevel gear bolts
• Differential case bolts
• Bevel gear mating surface
• Propeller shaft flange bolt
Lithium grease SUZUKI SUPER GREASE A
(99000-25010)
Oil seal lips
Sealant SUZUKI BOND NO. 1215
(99000-31110)
• Rear differential drain plug
• Mating surface of differential housing
• Mating surface of rear axle housing
To Next Page
Loading...
Need help?
General
