Manual Transmission: 5B-3
3) Separate the upper and lower crankcases. Refer to
“Engine Bottom Side Disassembly in Section 1D
(Page 1D-51)”.
Driveshaft Assembly
1) Remove the driveshaft assembly (1).
2) Remove the bearing pin (2).
NOTE
Do not lose the bearing pin (2).
Gearshift Cam / Gearshift Fork
1) Remove the retainer screws (1).
2) Remove the gearshift fork shafts (2) and No.1
gearshift forks (3).
3) Remove the gearshift cam bearing (4) and gearshift
cam (5).
4) Remove the No.3 gearshift fork (6).
I717H1520001-01
1
I717H1520002-02
2
I718H1520006-01
1
1
I718H1520007-01
3
2
I717H1520003-02
5
4
6
I717H1520004-01
To Next Page
Loading...
