Suzuki K6A-YH6 - Cylinder Head, Cams, and Valve Train Specifications; Front Cover, Timing Chain, and Tensioner Specifications

SPECIFICATIONS AND GENERAL INFORMATION
2-7
2
2.6 Front Cover, Timing Chain,
and Tensioner Specifications
2.7 Cylinder Head, Cams, and
Valve Train Specifications
Item
Unit Specification
Front Cover Torque
lb-in. (N•m) 97 (11)
Item
Unit Specification
Valve Clearance, Cold, Intake
in. (mm) 0.007—0.009 (0.18—0.23)
Valve Clearance, Cold, Exhaust
in. (mm) 0.012—0.014 (0.30—0.35)
Intake and Exhaust Manifold Mating
Face Distortion Limit
in. (mm) 0.000—0.002 (0.00—0.05)
Camshaft Housing Cap Screw
Torque
lb-in. (N•m) 97 (11)
Camshaft Journal Outside Diameter
in. (mm) 0.903—0.904 (22.934—22.955)
Camshaft Journal Inside Diameter
in. (mm) 0.905—0.906 (23.000—23.021)
Camshaft Lobe Height, Intake
in. (mm) 1.477—1.483 (37.520—37.680)
Camshaft Lobe Height, Exhaust
in. (mm) 1.470—1.476 (37.343—37.503)
Cylinder Head/Block Mating Face
Distortion Limit
in. (mm) 0.001 (0.03)
Camshaft Oil Clearance Standard
in. (mm) 0.002—0.003 (0.045—0.087)
Camshaft Oil Clearance Limit
in. (mm) 0.004 (0.10)
Valve Spring Tension Standard at
1.17 in. (29.9 mm)
b-ft (N•m) 22—26 (100—116)
Valve Spring Tension Limit at
1.17 in. (29.9 mm)
b-ft (N•m) 20 (88)
Valve Guide to Valve Stem
Clearance, Intake
in. (mm) 0.0007—0.0018 (0.020—0.047)
Valve Guide to Valve Stem
Clearance Limit, Intake
in. (mm) 0.002 (0.07)
Valve Guide to Valve Stem
Clearance, Exhaust
in. (mm) 0.0017—0.0028 (0.045—0.072)
Valve Guide to Valve Stem
Clearance Limit, Exhaust
in. (mm) 0.003 (0.09)
Tappet and Bore Clearance
in. (mm) 0.0009—0.0024 (0.025—0.062)
Tappet and Bore Clearance Limit
in. (mm) 0.003 (0.10)
Valve Spring Free Length
in. (mm) 1.35 (34.3)
Valve Spring Right Angle Range
in. (mm) 0.000—0.059 (0.00—1.5)
Cam Cover Cap Screw Torque
lb-in. (N•m) 96 (11)
Cylinder Head Cap Screw Torque
b-ft (N•m) 43.5 (59)