Suzuki K6A-YH6 - Cylinder Head & Valve Train Repair

REPAIR
7-17
7
Figure 7-42
NOTE
Apply engine oil to timing chain, tensioner, and guide
faces.
6. Apply oil to the timing chain guide (15) and secure
using cap screws (14 and 16).
7. Install tensioner (19) with spacer (18) and cap screw
(17).
8. Install tensioner link (13) using cap screws (12).
9. Install front cover. (See “Front Cover” on page 7-12.)
7.6 Cylinder Head, Cams, and
Valve Train
Cam Cover
Removal
See Figure 7-43.
Figure 7-43
1. Remove ignition coils. (See “Ignition Coils” on
page 7-8.)
2. Remove spark plugs. (See “Spark Plugs” on
page 7-8.)
3. Remove PCV valve. (See “PCV Valve” on page 7-4.)
4. Remove six cap screws (1) and cam cover (2).
5. Inspect and replace as needed.
TN0550
12
13
14
15
16
17
18
19
TN0724
1
1
2