Suzuki K6A-YH6 - Page 70

7-16
REPAIR
7
Installation
See Figures 7-40 through 7-42.
IMPORTANT
Make sure cylinder number 1 is at top dead center.
Figure 7-40
1. Align blue timing chain links (2) with slot/arrow (1) on
cam timing gears.
2. Align cam timing gear dots (3) with index marks (4)
on cylinder head.
3. Be sure crankshaft timing sprocket keyway (8) faces
up and aligns with index mark (5) on cylinder block.
4. Align yellow timing chain link (7) with crankshaft
timing gear slot (6) and slide timing gear onto
crankshaft.
NOTICE
Figure 7-41
5. Release tension adjuster (9) manual lock using a rod
(11) approximately 0.8 in. (2 mm) in diameter.
Depress the lock with the rod and reset the piston
(10) as shown.
TN0378
2
1
3
4
5
8
6
7
Be sure to re-check timing mark(s) alignment.
Improper installation may result in engine
damage.
TN0380
10
11
9