Suzuki K6A-YH6 - Air Intake & Exhaust Repair

REPAIR
7-3
7
7.1 Air Intake and Exhaust
Systems
Throttle Position Sensor
Removal and Installation
See Figure 7-1.
Figure 7-1
1. Remove screws (1) and throttle position sensor (2).
2. Inspect throttle position sensor. Replace as needed.
Pressure Sensor
Removal and Installation
See Figure 7-2.
Figure 7-2
1. Remove screws (2), pressure sensor (1), and O-ring
(3).
2. Inspect pressure sensor. Replace as needed.
Installation Notes
Always use new O-rings, gaskets, and seals.
Install pressure sensor by reversing the order of removal.
ISC (Idle Speed Control) Valve
Removal and Installation
See Figure 7-3.
Figure 7-3
1. Remove screws (2), ISC valve (3), and O-ring (1).
2. Inspect ISC valve. Replace as needed.
Installation Notes
Always use new O-rings, gaskets, and seals.
Install ISC valve by reversing the order of removal.
TN0713
1
2
TN0713
2
1
3
TN0691
2
3
1