Suzuki K6A-YH6 - Lubrication System Specifications

SPECIFICATIONS AND GENERAL INFORMATION
2-9
2
2.8 Lubrication System
Specifications
Item
Unit Specification
Oil Pump Housing Torque
lb-in. (N•m) 60 (6.78)
Oil Pump Outer Rotor Side
Clearance Limit
in. (mm) 0.003—0.005 (0.076—0.127)
Oil Pump Radial Clearance Limit
in. (mm) 0.0004—0.006 (0.10—0.15)
Inner Rotor and Pump Case
Clearance
in. (mm) 0.001—0.003 (0.025—0.076)
Oil Pump Relief Valve Spring Free
Length
in. (mm) 2.063 (52.40)
Oil Pump Relief Valve Spring
Tension at 1.516 in (38.5: mm)
of Length
b-ft (N•m) 17.3 (4.44)
Oil Pressure Sending Unit Torque
lb-in. (N•m) 115 (13)
Oil Pressure-Minimum at 4000 rpm
psi (kPa) 40 (276)
Oil Pan Torque
lb-in. (N•m) 97 (11)
Drain Plug Torque
b-ft (N•m) 36 (49)
Oil Filter Torque
lb-in. (N•m) 120 (13.5)
Recommended Oil
Normal /
Cold Region
10W-30 (SH) / 5W-30 (SG)
Oil Capacity when Replacing
Without Filter
qts (liters) 2.75 (2.6)
Oil Capacity when Also Replacing
Filter
qts (liters) 2.96 (2.8)
Oil Change Interval—Normal
Conditions
hours After First 35 Hours—Then Every 100 Hours or 3 Months
Oil Filter Replacement
hours After First 35 Hours—Then Every 100 Hours or 3 Months