Suzuki K6A-YH6 - Fuel System; Injectors

REPAIR
7-9
7
7.3 Fuel System
Injectors
Removal
See Figures 7-21 and 7-22.
!
WARNING
Figure 7-21
1. Remove cap screws (3).
2. Remove fuel rail (1) and injectors (2) as an assembly.
Figure 7-22
3. Remove injectors (5) from fuel rail (4).
4. Replace as needed.
Installation
See Figures 7-23 and 7-24.
Figure 7-23
NOTE
Always use new O-rings, gaskets, and seals.
1. Install injectors (5) into fuel rail (1) using new O-rings
(3) and isolators (2 and 4).
Figure 7-24
2. Install fuel rail (6) and injectors (7) as an assembly.
Secure with cap screws (8).
Fuel system may be under pressure. Relieve fuel
pressure before servicing system.
TN0738
1
2
3
TN0739
4
5
5
TN0739
5
1
4
3
2
3
2
TN0738
6
7
8