16
RADIATOR LOUVER
Insert the boss of radiator louver into the hole of radia-
tor.
Install the radiator louver as shown in the photograph.
A: Radiator louver
B: Boss
C: Hole
RADIATOR COVER
Install the radiator cover with flange bolt and stepped
washer.
A: Radiator cover
B: 6 × 12 mm flange bolt
C: Stepped washer OD:16.0 mm ID:6.5 mm T:3.5 mm
FUEL TANK VENT HOSE
Install the fuel tank vent hose to the fuel tank cap.
Insert the free end of fuel tank vent hose to the hole of
front number plate.
A: Fuel tank vent hose
B: Fuel tank cap
C: Front number plate
D: Hole
FUEL LABEL (FOR LIMITED MARKET)
Stick the label on the fuel tank.
A: Fuel tank
B:Fuel label
Be sure not to bend or twist the hose when
installing.
UNLEADED
FUEL ONLY
To Next Page
Loading...
