Suzuki VL800 - Page 10

8 VL800K5 (’05-MODEL)
CAMSHAFT + CYLINDER HEAD
Unit: mm (in)
CYLINDER + PISTON + PISTON RING
Unit: mm (in)
ITEM STANDARD LIMIT
Cam height
Front
IN.
35.95 – 35.99
(1.415 – 1.417)
35.65
(1.404)
EX.
36.92 – 36.96
(1.454 – 1.455)
36.62
(1.442)
Rear
IN.
35.50 – 35.54
(1.398 – 1.399)
35.20
(1.386)
EX.
36.52 – 36.62
(1.438 – 1.442)
36.28
(1.428)
Camshaft journal oil clearance 0.032 – 0.066
(0.0013 – 0.0026)
0.150
(0.0059)
Camshaft journal holder I.D. Rear left side
Front right side
20.012 – 20.025
(0.7879 – 0.7884)
----
Rear right side
Front left side
25.012 – 25.025
(0.9847 – 0.9852)
----
Camshaft journal O.D. Rear left side
Front right side
19.959 – 19.980
(0.7858 – 0.7866)
----
Rear right side
Front left side
24.959 – 24.980
(0.9826 – 0.9835)
----
Camshaft runout
----
0.10
(0.004)
Cylinder head distortion
----
0.05
(0.002)
Cylinder head cover distortion
----
0.05
(0.002)
ITEM STANDARD LIMIT
Compression pressure
1 300 – 1 700 kPa
(13 – 17 kgf/cm², 185 – 242 psi)
1 100 kPa
(11 kgf/cm²
156 psi)
Compression pressure
difference ----
200 kPa
(2 kgf/cm²
28 psi)
Piston to cylinder clearance 0.045 – 0.055
(0.0018 – 0.0022)
0.120
(0.0047)
Cylinder bore 83.000 – 83.015
(3.2677 – 3.2683)
83.085
(3.2711)
Piston diam. 82.950 – 82.965
(3.2657 – 3.2663)
Measure at 15 mm (0.6 in) from the skirt end.
82.880
(3.2630)
Cylinder distortion
----
0.05
(0.002)
SAMPLE