Suzuki VL800 - Pair (Air Supply) System and Emission Control System Inspection

122 VL800K5 (’05-MODEL)
PAIR (AIR SUPPLY) SYSTEM AND EMISSION CONTROL SYSTEM
INSPECTION
PCV HOSE
• Remove the PCV hose from the crankcase breather cover.
• Inspect the PCV hose for wear or damage.
• If it is worn or damaged, replace the PCV hose with a new
one.
PAIR HOSES
• Inspect the PAIR hoses for wear or damage.
• Inspect the PAIR hoses for secure connection.
PAIR REED VALVE
• Remove the PAIR control solenoid valve. ($Page 123)
• Remove the PAIR reed valve.
• Inspect the reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace the
PAIR reed valve with a new one.
• Install the PAIR reed valve and PAIR reed valve cover as
shown.
• Install the PAIR control solenoid valve. ($Page 123)
SAMPLE