VL800K5 (’05-MODEL) 93
FUEL SYSTEM
FUEL TANK LIFT-UP
• Remove the seat. ($VL800K1 7-2)
• Remove the fuel tank mounting bolt
1.
• Lift and support the fuel tank about 10 cm (3.94 in) with the
prop stay.
NOTE:
Be careful not to lift the fuel tank more than about 10 cm (3.94
in), or hoses will be twisted.
FUEL TANK REMOVAL
• Remove the speedometer. ($VL800K1 5-3)
• Lift and support the fuel tank. ($Page 93)
• Disconnect the fuel pump lead wire coupler
1.
• Place a rag under the fuel feed hose and remove the fuel feed
hose
2.
#
+
• Remove the fuel tank.
#
FUEL TANK INSTALLATION
• Installation is in the reverse order of removal.
When removing the fuel tank, do not leave the fuel
feed hose
2 on the fuel tank side.
Gasoline is highly flammable and explosive.
Keep heat, spark and flame away.
Be careful not to damage the frame
A by the fuel tank.
SAMPLE
To Next Page
Loading...
