VL800K5 (’05-MODEL) 103
AIR CLEANER BOX REMOVAL
• Remove the fuel tank. ($Page 93)
• Remove the bolts
1 and lossen the clamp screw
2.
NOTE:
“
✩
” indicates hook location.
• Disconnect the IAT sensor lead wire coupler
3.
• Disconnect the PAIR hose
4.
• Remove the IAP sensors (Front cylinder side
5 and Rear cyl-
inder side
6) from the mount stay.
• Remove the PCV hose
7 and loosen the clamp screw
8.
• Remove the air intake pipe
9.
AIR CLEANER BOX INSTALLATION
Installation is in the reverse order of removal.
SAMPLE
To Next Page
Loading...
