12 VL800K5 (’05-MODEL)
* INJECTOR + FUEL PUMP + FUEL PRESSURE REGULATOR
* FI SENSORS+ SECONDARY THROTTLE VALVE ACTUATOR
ITEM SPECIFICATION NOTE
* Injector resistance 11 – 13 Ω at 20 °C (68 °F)
* Fuel pump discharge amount Approx. 168 ml (5.7/5.9 US/lmp oz)
and more/10 sec.
* Fuel pressure regulator operating set
pressure
Approx. 300 kPa (3.0 kgf/cm², 43 psi)
ITEM SPECIFICATION NOTE
* CKP sensor resistance 184 – 276 Ω
* CKP sensor peak voltage
4.0 V and more
When
cranking
* IAP sensor input voltage 4.5 – 5.5 V
* IAP sensor output voltage Approx. 2.6 V at idle speed
* TP sensor input voltage 4.5 – 5.5 V
* TP sensor resistance Closed Approx. 1.1 kΩ
Opened Approx. 4.3 kΩ
* TP sensor output voltage Closed Approx. 1.1 V
Opened Approx. 4.3 V
* ECT sensor input voltage 4.5 – 5.5 V
* ECT sensor resistance Approx. 2.45 kΩ at 20 °C (68 °F)
* IAT sensor input voltage 4.5 – 5.5 V
* IAT sensor resistance Approx. 2.6 kΩ at 20 °C (68 °F)
* TO sensor resistance 19.1 – 19.7 kΩ
* TO sensor voltage Normal 0.4 – 1.4 V
Leaning 3.7 – 4.4 V
When
leaning 65 °
* GP switch voltage
0.6 V and more
From 1st to
Top
* Injector voltage Battery voltage
* STP sensor input voltage 4.5 – 5.5 V
* STP sensor resistance Closed Approx. 0.5 kΩ
Opened Approx. 3.9 kΩ
* STP sensor output voltage Closed Approx. 0.5 V
Opened Approx. 3.9 V
* STV actuator resistance Approx. 6.5 Ω
SAMPLE
To Next Page
Loading...
