©2018 SwellPro All Rights Reserved
18
Remote Controller Pairing
Always pair the remote controller and then select the FPV channel to match the best channels and
avoid interference.
DescriptionRemote Control Operation
FPV Channel Adjust
FPV Chennel Button
DescriptionRemote Control Operation
1. To pair the remote controller to the drone, hold the Return
Home switch down and simultaneously power on the
remote controller.
2. The remote controller will vibrate and beep twice. The
Controller Status Light will flash red and green.
3. Power on the drone. After pairing has completed, the
Controller Status Light will turn green.
4. Long-press the FPV channel button. The FPV screen will
display “RF SEARCHING” and automatically find the best
FPV channel.
There are 8 FPV channels available. Long-press the FPV channel button
(CH) and the system will automatically search for channels.
In the absence of obstacles and interference the flight height can reach >80m and FPV
transmission range can reach 800m.
DescriptionRemote Control Operation
Camera Gimbal Control
Camera up Camera down
Camera up: Tilt camera up
Camera down: Tilt camera down
To Next Page
Loading...
