©2018 SwellPro All Rights Reserved
34
Safety Operation Guideline & Disclaimer and Warning
Safe Operation Guidelines
1. Flying Conditions and Environmental Considerations
- Fly in open spaces or above the water surface that is far away from crowds.
- The operating temperature range of the Spry is -10°C to 40°C.
- Observe local regulations and flight restrictions of your Aviation Authority.
2. Pre-Flight Inspection and Checks
- Make sure all batteries are fully charged.
- Check all propellers are in good condition and correctly fastened. The edges of the propeller
blades must be smooth and undamaged.
- Manually rotate the 4 motors to ensure they can spin smoothly.
-Ensure the sealing surfaces of the cover are clean, free of dirt, sand, or any other
contaminants.
- Make sure the drone fuselage is sealed and that the membrane on the top of the battery
cover hatch is in good condition.
3.Flying Guide
- Many regulations require the pilot to fly a drone within line of sight. Take particular care
when flying a drone out of sight.
- Unless it is an emergency, NEVER Lock or STOP the motors in flight as this will cause the
drone to fall to the ground and crash.
- When the low battery level warning is activated, plan to return the drone and land safely
before the battery reaches a critical level.
- The Return Home function can be used to reorient the drone towards the Home Point. By
activating the Return Home function, the drone will rise to the the return altitude (20m) and
then turn towards the Home Point before starting its return.
- If any obstacles are in the flight path of the drone during a Return Home process, control
should be regained by turning off the Return Home function.
- If you inadvertently crash your drone, lock the motors to prevent damage to the motors
and propellers.
To Next Page
Loading...
