J
Jennifer EverettAug 31, 2025
What to do if there is no design data in the diskette of SWF K Series Sewing Machine?
- EelopezAug 31, 2025
If there is no design data in the diskette, replace the diskette.
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if there is no design data in the diskette of SWF K Series Sewing Machine?
If there is no design data in the diskette, replace the diskette.
How to fix main shaft motor driver error on SWF K Series?
To resolve the main shaft motor driver error, turn off and on the main switch.
What causes main shaft motor overload error on SWF Sewing Machine?
If a thread tangles the hook, when the needle bar's control body is bad, and when the thread becomes tangled during trimming, check the hook of the front head, and turn off and on the main switch.
How to fix bad memory battery on SWF K Series Sewing Machine?
If the battery is exhausted when the power is off or the status of saving the number of stitches and the x, y position information is unstable, call the A/S center at the nearest to your place and replace the battery. If this error frequently occurs, you need to replace the CPU board.
What causes pulley ratio error on SWF Sewing Machine and how to resolve it?
If the set pulley ratio is wrong, change the driver setting after checking the main shaft pulley ratio.
What causes AC Line error on SWF K Series and how to fix it?
If a problem occurs on the joint board, replace the joint board.
What to do if there are no sectors on the diskette of SWF K Series Sewing Machine?
If a floppy diskette is not formatted or the format is different, format the diskette or replace it with another one.
What to do if 100 memory rooms are full on SWF K Series Sewing Machine?
If the 100 memory rooms are full with saved designs, you should delete unnecessary data.
General| Brand | SWF |
|---|---|
| Series | K Series |
| Category | Sewing Machine |
| Thread Trimming | Automatic |
| Stitch Speed | 1200 SPM |
| Maximum Speed | 1200 SPM |
| Supported File Formats | DST |
| Power Requirements | 50/60Hz |
| Dimensions | Varies by model |
| Weight | Varies by model |
Covers installation, backup, memory management, and system settings.
Guides on adjusting machine settings and basic specifications.
Covers setting various machine specifications like head, color, trim.
Provides a hierarchical overview of the function menus.
Explains how to load embroidery designs from memory.
Details importing designs from external devices.
Overview of various setting options for embroidery.
Covers fundamental settings like scale, angle, and mirror.
Details parameters related to the embroidery process.
Explains parameters related to the machine's operation.
Covers changing needle bars and colors for designs.
Details setting the frame's start, middle, and end positions.
Configures options like cording, sequin, and boring.
Checks machine readiness for embroidery work.
Repeats single or multiple designs within one frame.
Repeats one design along X and Y axes.
Synthesizes multiple designs to create new designs.
Allows editing of embroidery designs.
Changes codes and stitch counts based on design data.
Saves two different designs from a chosen part of a design.
Combines short stitches to prevent thread breakage.
Accesses machine maintenance functions.
Displays saved error messages and their details.
Lists error messages and their corresponding handling procedures.
