3.4.1. List of Configuration Items
Items marked with
• → [UConf] are stored in persistent backup
• → [.d41] are part of State files, therefore not stored in UConf
DMY setting
Note that date format format setting is stored in two places as YMD is extension of 41C
formats
YMD setting → [UConf]
DMY (Flag 31) → [.d41]
CLK24 setting
Bit 6 of scratch register B → [UConf]
Mute flag
Flag 26 → [.d41]
Display modes
Stack mode → [UConf]
Program mode → [UConf]
Module screens
Two column flag → [UConf]
Short name flag → [UConf]
System configuration
Slow auto repeat → [UConf]
Printer line delay → [UConf]
3.4.2. Export of Configuration Settings
Configuration Settings can be saved into the file from the menu Setup → Setings → "Export Settings
to 'param.cfg'"
USB Disk Mode is automatically entered after the parem.cfg file is written.
3.4.3. Restore of Configuration Settings
User can copy param.cfg file to root of the FAT disk.
The FAT disk is checked for presence of the /param.cfg file after each deactivation of USB Disk Mode
and configuration settings are restored from this file.
The /param.cfg file is removed afterwards.
12
To Next Page
Loading...
