When the 'Slow Auto-repeat' flag is active auto-repeat delays are prolonged.
Note that this value is stored in persistent configuration.
6.4.4. Printer Line Delay
This parameter sets printer line delay the same way as DELAY command in IR printer module.
It specifies how long the calculator waits between sending lines of information to the HP 82240A/B
Thermal Printer.
The value is the delay time, in seconds. Default value is 1.8s.
Note that fastest line printing time for HP 82240A/B is approx. 1.2s, lower values of printer line delay
are intended for IR printer emulators.
Note that this value is stored in persistent configuration.
6.4.5. Create Full Backup
Creates five files in /BACKUP directory:
• .b41 - Base backup file
• .cst - CST keys
• .d41 - State file
• .m41 - Module lists
• .ram - RAM pages
All those files use the same name and different extensions. Core backup file has extension .b41 and
contains list of all files related to the particular backup.
6.4.6. Restore from Backup
User selects a .b41 file and all referenced files are automatically loaded. All the referenced files
have to be in the same directory as the .b41 file.
For 'distribution' purposes (e.g. when shared between users) unused files could be removed (both
the file and reference in .b41 file).
During restore the .mod files are primarily looked up in .b41 directory when loaded from .m41 file.
6.4.7. Export Settings to 'param.cfg'
Writes configuration settings (UConf) to the /param.cfg file. See Persistent Configuration Settings for
more details.
6.4.8. Reset settings to defaults
Resets Persistent Configuration Settings to defaults.
31
To Next Page
Loading...
