SwissMicros DM41X - 6.4. Settings Menu

• Load Active Modules (AM) List
• Load Flash and AM Lists
• Load Flash, clear AM List
See Backup Module Lists for details.
6.3.5. Save Modules
Activates Save Modules sub-menu:
• Save Active Modules (AM) List only
• Save Flash and AM Lists
See Backup Module Lists for details.
6.3.6. Load RAM Pages >
Fills RAM Area from the file.
6.3.7. Save RAM Pages >
Saves RAM Area into the file.
Saves the number of RAM pages currently allocated by active modules.
Please see section RAM Pages for additional details about RAM page use.
6.4. Settings menu
6.4.1. Set Time >
Used for setting the time.
• Use the function keys to adjust the time.
• Press Set to write the new time to the calculator clock or [ ← ] to cancel your changes.
6.4.2. Set Date >
Used for setting the date.
• Use the function keys to adjust the date.
• Press Set to write the new date to the calculator clock or [ ← ] to cancel your changes.
• Σ+ could be used to change between DMY/MDY formats.
6.4.3. Slow Auto-repeat
Selecting this menu item toggles the 'Slow Auto-repeat' flag.
30